Scanner diagnostic pour vtt

Pour problème méchanique diverse non relié à une marque en particulier
Post Reply
Jeremie32
Posts: 20
Joined: November 29, 2010, 12:25 am
VTT: OutlanderMax650

Scanner diagnostic pour vtt

Post by Jeremie32 »

Bonjour,

Je voudrais savoir s'il est envisageable de trouver un scanner de diagnostic pour trouver les codes d'erreur générés par l'ordinateur d'un vtt, un peu comme ceux des voitures qu'on peut trouver chez canadiantire. Est-ce qu'il y en a des universel ou ca marche par marque, ou je peux en trouver, m'en recommandez vous 1 en particulier ?

Merci d'avance!!!


Bearcub
Posts: 2670
Joined: April 9, 2007, 8:39 pm
VTT: Wolverine 2000
Location: Sainte-Lucie-Des-Laurentides
Contact:

Re: Scanner diagnostic pour vtt

Post by Bearcub »

J y avais deja penssé et suite a ta quastion j ai fais une petite recherche pour mon polaris.
J ai trouvé ca et ca semble bon pour canam et autres marques.
http://www.strategictq.com/Motorcycle.html
Yamaha Wolverine 350 4x4 2000
https://www.facebook.com/MaconnerieMonette
Bearcub
Posts: 2670
Joined: April 9, 2007, 8:39 pm
VTT: Wolverine 2000
Location: Sainte-Lucie-Des-Laurentides
Contact:

Re: Scanner diagnostic pour vtt

Post by Bearcub »

Oublis ca man,check le prix
Our low price: $2,873.33
Yamaha Wolverine 350 4x4 2000
https://www.facebook.com/MaconnerieMonette
Jeremie32
Posts: 20
Joined: November 29, 2010, 12:25 am
VTT: OutlanderMax650

Re: Scanner diagnostic pour vtt

Post by Jeremie32 »

Ayoye! J'espere qu'il y a de quoi de moins cher, un ordi pour voiture c style 300$ de base, peut pas croire qu'on peut pas avoir 1 equivalent pour vtt dans cette gamme de prix...
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?
firefight
Posts: 7080
Joined: May 25, 2002, 7:32 pm
VTT: renegadexxc1000
Location: chaudieres appalache

Re: Scanner diagnostic pour vtt

Post by firefight »

Jeremie32 wrote:Ayoye! J'espere qu'il y a de quoi de moins cher, un ordi pour voiture c style 300$ de base, peut pas croire qu'on peut pas avoir 1 equivalent pour vtt dans cette gamme de prix...
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?
messemble que voila 2-3 mois quelqu'un avait posté la procedure pour lire les codes des can-am

donc si on la retrouve reste a savoir ce que veulent dirent ces codes.
gade1000xxc 2012
xp 900 rzr 2011
gade xxc 2010
gadex2008
can am DS 650 2004 et 2006
tjr partant pour un plan pas d'allure comme fullbuzz,inouk et jo raptor
User avatar
Kerosen
Posts: 9026
Joined: October 5, 2002, 2:03 pm
VTT: A voir
Location: Carignan

Re: Scanner diagnostic pour vtt

Post by Kerosen »

Jeremie32 wrote:Ayoye! J'espere qu'il y a de quoi de moins cher, un ordi pour voiture c style 300$ de base, peut pas croire qu'on peut pas avoir 1 equivalent pour vtt dans cette gamme de prix...
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?

On vient d'en acheter a l'école ou j'enseigne , on a acheter de Genesys pour auto et c'est 2700$ la copie
Kerosen
Jeremie32
Posts: 20
Joined: November 29, 2010, 12:25 am
VTT: OutlanderMax650

Re: Scanner diagnostic pour vtt

Post by Jeremie32 »

Merci les gars. Je vais fouiller dans les vieux messages pour trouver la procédure en question :)
2700$ c définitivement trop cher pour moi :P
AKE
Posts: 5901
Joined: May 20, 2007, 9:23 am
VTT: oui
Location: Terrebonne (La Plaine)

Re: Scanner diagnostic pour vtt

Post by AKE »

To read the active code, do the following before turning off the engine and clearing the code:

1) Turn the key to the lights ON position.
2) Use the mode button to scroll to the Engine Hour (EH).
3) Press the mode button once more and hold it while
4) Quickly (very quickly) toggle the HI LO switch. A minimum of 3 toggles within 2 seconds.

If there is an active code, it should scroll across the display.

Enjoy!

P0106 Air pressure sensor voltage out of range.
P0107 Air pressure sensor voltage too low.
P0108 Air pressure sensor voltage too high.
P0111 Air temperature sensor functional problem.
P0112 Air temperature sensor voltage too low.
P0113 Air temperature sensor voltage too high.
P0116 Engine temperature sensor functional problem.
P0117 Engine temperature sensor voltage too low.
P0118 Engine temperature sensor voltage too high.
P0122 Throttle position sensor voltage too low.
P0123 Throttle position sensor voltage too high
P0231 Fuel pump open circuit or shorted to ground.
P0232 Fuel pump shorted to battery.
P0261 Cylinder #1 injector open circuit or shorted to ground.
P0262 Cylinder #1 injector shorted to battery.
P0264 Cylinder #2 injector open circuit or shorted to ground.
P0265 Cylinder #2 injector shorted to battery.
P0336 High engine RPM detected.
P0337 No cranshaft signal detected.
P0339 Cranshaft signal fault.
P0334 Cam phase sensor signal missing.
P0351 No ignition output stage Cylinder #1.
P0352 No ignition output stage Cylinder #2.
P0480 Engine fan short-circuit to battery.
P0480 Engine fan short-circuit to ground or open.
P0505 Idle air control valve output stage cutoff memory difference.
P0505 Idle air control valve output stage fault.
P0513 Incorrect DESS key.
P0520 Oil pressure switch functional problem.
P0562 Battery voltage too low.
P0563 Battery voltage too high.
P0600 CAN bus off.
P0600 CAN ID 514 missing.
P0601 Throttle position sensor adaptation failure.
P0601 Module call monitoring.
P0602 ECM not coded.
P0604 RAM fault.
P0605 EEPROM fault.
P0605 EEPROM checksum fault.
P0605 Coding ID checksum fault.
P0605 Coding checksum fault.
P0605 Programming checksum fault.
P0608 Sensor's power supply voltage too low.
P0608 Sensor's power supply voltage too high.
P0616 Starter relay open circuit or shorted to ground.
P0617 Starter relay shorted to battery.
P0705 Transmission range sensor circuit malfunction (PRNHL).
P1102 Throttle position sensor adaptation failure.
P1104 Throttle position sensor adaptation failure.
P1116 High temp.
P1148 Saftey fuel cut off detected.
P1202 Oil pressure switch still closed.
P1203 Oil pressure switch leakage.
P1520 Low oil.
P1655 DESS line shorted to battery.
P1656 DESS line shorted to ground.
P1675 Relay 2 shorted to battery.
P1676 Relay 2 open circuit or shorted to ground.
P1683 CAN RAM fault.
P2119 ECU wrong.
Ake
Outlander 400 2004
34500km ٩(̾●̮̮̃̾•̃̾)۶
60CSX
En Afrique y marche +de 1km pour avoir de l'eau potable
moi quand je me leve le matin...je pisse dedans :)
Image
Jeremie32
Posts: 20
Joined: November 29, 2010, 12:25 am
VTT: OutlanderMax650

Re: Scanner diagnostic pour vtt

Post by Jeremie32 »

Merci AKE !!
Patman
Site Admin
Posts: 19151
Joined: February 27, 2006, 10:13 am
VTT: Kodiak 400
Location: Ancienne-Lorette

Re: Scanner diagnostic pour vtt

Post by Patman »

AKE wrote:To read the active code, do the following before turning off the engine and clearing the code:

1) Turn the key to the lights ON position.
2) Use the mode button to scroll to the Engine Hour (EH).
3) Press the mode button once more and hold it while
4) Quickly (very quickly) toggle the HI LO switch. A minimum of 3 toggles within 2 seconds.

If there is an active code, it should scroll across the display.

Enjoy!

P0106 Air pressure sensor voltage out of range.
P0107 Air pressure sensor voltage too low.
P0108 Air pressure sensor voltage too high.
P0111 Air temperature sensor functional problem.
P0112 Air temperature sensor voltage too low.
P0113 Air temperature sensor voltage too high.
P0116 Engine temperature sensor functional problem.
P0117 Engine temperature sensor voltage too low.
P0118 Engine temperature sensor voltage too high.
P0122 Throttle position sensor voltage too low.
P0123 Throttle position sensor voltage too high
P0231 Fuel pump open circuit or shorted to ground.
P0232 Fuel pump shorted to battery.
P0261 Cylinder #1 injector open circuit or shorted to ground.
P0262 Cylinder #1 injector shorted to battery.
P0264 Cylinder #2 injector open circuit or shorted to ground.
P0265 Cylinder #2 injector shorted to battery.
P0336 High engine RPM detected.
P0337 No cranshaft signal detected.
P0339 Cranshaft signal fault.
P0334 Cam phase sensor signal missing.
P0351 No ignition output stage Cylinder #1.
P0352 No ignition output stage Cylinder #2.
P0480 Engine fan short-circuit to battery.
P0480 Engine fan short-circuit to ground or open.
P0505 Idle air control valve output stage cutoff memory difference.
P0505 Idle air control valve output stage fault.
P0513 Incorrect DESS key.
P0520 Oil pressure switch functional problem.
P0562 Battery voltage too low.
P0563 Battery voltage too high.
P0600 CAN bus off.
P0600 CAN ID 514 missing.
P0601 Throttle position sensor adaptation failure.
P0601 Module call monitoring.
P0602 ECM not coded.
P0604 RAM fault.
P0605 EEPROM fault.
P0605 EEPROM checksum fault.
P0605 Coding ID checksum fault.
P0605 Coding checksum fault.
P0605 Programming checksum fault.
P0608 Sensor's power supply voltage too low.
P0608 Sensor's power supply voltage too high.
P0616 Starter relay open circuit or shorted to ground.
P0617 Starter relay shorted to battery.
P0705 Transmission range sensor circuit malfunction (PRNHL).
P1102 Throttle position sensor adaptation failure.
P1104 Throttle position sensor adaptation failure.
P1116 High temp.
P1148 Saftey fuel cut off detected.
P1202 Oil pressure switch still closed.
P1203 Oil pressure switch leakage.
P1520 Low oil.
P1655 DESS line shorted to battery.
P1656 DESS line shorted to ground.
P1675 Relay 2 shorted to battery.
P1676 Relay 2 open circuit or shorted to ground.
P1683 CAN RAM fault.
P2119 ECU wrong.
Clissssss AKE t'en as eu des troubles sur ton can am :(aaa) :wink: :lol: :lol: :lol: :lol: :lol:
Patman
Kodiak 400 / 2000
GMC Sierra 2003 / 4p/6litres
Glastron Gt 205, 4.3L, 190 hp, 2007 , Vendu
Monterey 282, 31', 2 x 5,0 litres MPI de 270 hp chaque
Garmin276C
AKE
Posts: 5901
Joined: May 20, 2007, 9:23 am
VTT: oui
Location: Terrebonne (La Plaine)

Re: Scanner diagnostic pour vtt

Post by AKE »

:lol: :lol: :lol: :lol: c pour les 650-800 sa les 400 ont pas de trouble :roll:
Ake
Outlander 400 2004
34500km ٩(̾●̮̮̃̾•̃̾)۶
60CSX
En Afrique y marche +de 1km pour avoir de l'eau potable
moi quand je me leve le matin...je pisse dedans :)
Image
Post Reply

Return to “Mécanique: Trucs et astuces”