Scanner diagnostic pour vtt
-
Jeremie32
- Posts: 20
- Joined: November 29, 2010, 12:25 am
- VTT: OutlanderMax650
Scanner diagnostic pour vtt
Bonjour,
Je voudrais savoir s'il est envisageable de trouver un scanner de diagnostic pour trouver les codes d'erreur générés par l'ordinateur d'un vtt, un peu comme ceux des voitures qu'on peut trouver chez canadiantire. Est-ce qu'il y en a des universel ou ca marche par marque, ou je peux en trouver, m'en recommandez vous 1 en particulier ?
Merci d'avance!!!
Je voudrais savoir s'il est envisageable de trouver un scanner de diagnostic pour trouver les codes d'erreur générés par l'ordinateur d'un vtt, un peu comme ceux des voitures qu'on peut trouver chez canadiantire. Est-ce qu'il y en a des universel ou ca marche par marque, ou je peux en trouver, m'en recommandez vous 1 en particulier ?
Merci d'avance!!!
-
Bearcub
- Posts: 2670
- Joined: April 9, 2007, 8:39 pm
- VTT: Wolverine 2000
- Location: Sainte-Lucie-Des-Laurentides
- Contact:
Re: Scanner diagnostic pour vtt
J y avais deja penssé et suite a ta quastion j ai fais une petite recherche pour mon polaris.
J ai trouvé ca et ca semble bon pour canam et autres marques.
http://www.strategictq.com/Motorcycle.html
J ai trouvé ca et ca semble bon pour canam et autres marques.
http://www.strategictq.com/Motorcycle.html
Yamaha Wolverine 350 4x4 2000
https://www.facebook.com/MaconnerieMonette
https://www.facebook.com/MaconnerieMonette
-
Bearcub
- Posts: 2670
- Joined: April 9, 2007, 8:39 pm
- VTT: Wolverine 2000
- Location: Sainte-Lucie-Des-Laurentides
- Contact:
Re: Scanner diagnostic pour vtt
Oublis ca man,check le prix
Our low price: $2,873.33
Our low price: $2,873.33
Yamaha Wolverine 350 4x4 2000
https://www.facebook.com/MaconnerieMonette
https://www.facebook.com/MaconnerieMonette
-
Jeremie32
- Posts: 20
- Joined: November 29, 2010, 12:25 am
- VTT: OutlanderMax650
Re: Scanner diagnostic pour vtt
Ayoye! J'espere qu'il y a de quoi de moins cher, un ordi pour voiture c style 300$ de base, peut pas croire qu'on peut pas avoir 1 equivalent pour vtt dans cette gamme de prix...
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?
-
firefight
- Posts: 7080
- Joined: May 25, 2002, 7:32 pm
- VTT: renegadexxc1000
- Location: chaudieres appalache
Re: Scanner diagnostic pour vtt
messemble que voila 2-3 mois quelqu'un avait posté la procedure pour lire les codes des can-amJeremie32 wrote:Ayoye! J'espere qu'il y a de quoi de moins cher, un ordi pour voiture c style 300$ de base, peut pas croire qu'on peut pas avoir 1 equivalent pour vtt dans cette gamme de prix...
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?
donc si on la retrouve reste a savoir ce que veulent dirent ces codes.
gade1000xxc 2012
xp 900 rzr 2011
gade xxc 2010
gadex2008
can am DS 650 2004 et 2006
tjr partant pour un plan pas d'allure comme fullbuzz,inouk et jo raptor
xp 900 rzr 2011
gade xxc 2010
gadex2008
can am DS 650 2004 et 2006
tjr partant pour un plan pas d'allure comme fullbuzz,inouk et jo raptor
- Kerosen
- Posts: 9026
- Joined: October 5, 2002, 2:03 pm
- VTT: A voir
- Location: Carignan
Re: Scanner diagnostic pour vtt
Jeremie32 wrote:Ayoye! J'espere qu'il y a de quoi de moins cher, un ordi pour voiture c style 300$ de base, peut pas croire qu'on peut pas avoir 1 equivalent pour vtt dans cette gamme de prix...
Merci pour ta réponse rapide en tk. Quelqu'un d'autre a de l'info la-dessus ?
On vient d'en acheter a l'école ou j'enseigne , on a acheter de Genesys pour auto et c'est 2700$ la copie
Kerosen
-
Jeremie32
- Posts: 20
- Joined: November 29, 2010, 12:25 am
- VTT: OutlanderMax650
Re: Scanner diagnostic pour vtt
Merci les gars. Je vais fouiller dans les vieux messages pour trouver la procédure en question :)
2700$ c définitivement trop cher pour moi
2700$ c définitivement trop cher pour moi
-
AKE
- Posts: 5901
- Joined: May 20, 2007, 9:23 am
- VTT: oui
- Location: Terrebonne (La Plaine)
Re: Scanner diagnostic pour vtt
To read the active code, do the following before turning off the engine and clearing the code:
1) Turn the key to the lights ON position.
2) Use the mode button to scroll to the Engine Hour (EH).
3) Press the mode button once more and hold it while
4) Quickly (very quickly) toggle the HI LO switch. A minimum of 3 toggles within 2 seconds.
If there is an active code, it should scroll across the display.
Enjoy!
P0106 Air pressure sensor voltage out of range.
P0107 Air pressure sensor voltage too low.
P0108 Air pressure sensor voltage too high.
P0111 Air temperature sensor functional problem.
P0112 Air temperature sensor voltage too low.
P0113 Air temperature sensor voltage too high.
P0116 Engine temperature sensor functional problem.
P0117 Engine temperature sensor voltage too low.
P0118 Engine temperature sensor voltage too high.
P0122 Throttle position sensor voltage too low.
P0123 Throttle position sensor voltage too high
P0231 Fuel pump open circuit or shorted to ground.
P0232 Fuel pump shorted to battery.
P0261 Cylinder #1 injector open circuit or shorted to ground.
P0262 Cylinder #1 injector shorted to battery.
P0264 Cylinder #2 injector open circuit or shorted to ground.
P0265 Cylinder #2 injector shorted to battery.
P0336 High engine RPM detected.
P0337 No cranshaft signal detected.
P0339 Cranshaft signal fault.
P0334 Cam phase sensor signal missing.
P0351 No ignition output stage Cylinder #1.
P0352 No ignition output stage Cylinder #2.
P0480 Engine fan short-circuit to battery.
P0480 Engine fan short-circuit to ground or open.
P0505 Idle air control valve output stage cutoff memory difference.
P0505 Idle air control valve output stage fault.
P0513 Incorrect DESS key.
P0520 Oil pressure switch functional problem.
P0562 Battery voltage too low.
P0563 Battery voltage too high.
P0600 CAN bus off.
P0600 CAN ID 514 missing.
P0601 Throttle position sensor adaptation failure.
P0601 Module call monitoring.
P0602 ECM not coded.
P0604 RAM fault.
P0605 EEPROM fault.
P0605 EEPROM checksum fault.
P0605 Coding ID checksum fault.
P0605 Coding checksum fault.
P0605 Programming checksum fault.
P0608 Sensor's power supply voltage too low.
P0608 Sensor's power supply voltage too high.
P0616 Starter relay open circuit or shorted to ground.
P0617 Starter relay shorted to battery.
P0705 Transmission range sensor circuit malfunction (PRNHL).
P1102 Throttle position sensor adaptation failure.
P1104 Throttle position sensor adaptation failure.
P1116 High temp.
P1148 Saftey fuel cut off detected.
P1202 Oil pressure switch still closed.
P1203 Oil pressure switch leakage.
P1520 Low oil.
P1655 DESS line shorted to battery.
P1656 DESS line shorted to ground.
P1675 Relay 2 shorted to battery.
P1676 Relay 2 open circuit or shorted to ground.
P1683 CAN RAM fault.
P2119 ECU wrong.
1) Turn the key to the lights ON position.
2) Use the mode button to scroll to the Engine Hour (EH).
3) Press the mode button once more and hold it while
4) Quickly (very quickly) toggle the HI LO switch. A minimum of 3 toggles within 2 seconds.
If there is an active code, it should scroll across the display.
Enjoy!
P0106 Air pressure sensor voltage out of range.
P0107 Air pressure sensor voltage too low.
P0108 Air pressure sensor voltage too high.
P0111 Air temperature sensor functional problem.
P0112 Air temperature sensor voltage too low.
P0113 Air temperature sensor voltage too high.
P0116 Engine temperature sensor functional problem.
P0117 Engine temperature sensor voltage too low.
P0118 Engine temperature sensor voltage too high.
P0122 Throttle position sensor voltage too low.
P0123 Throttle position sensor voltage too high
P0231 Fuel pump open circuit or shorted to ground.
P0232 Fuel pump shorted to battery.
P0261 Cylinder #1 injector open circuit or shorted to ground.
P0262 Cylinder #1 injector shorted to battery.
P0264 Cylinder #2 injector open circuit or shorted to ground.
P0265 Cylinder #2 injector shorted to battery.
P0336 High engine RPM detected.
P0337 No cranshaft signal detected.
P0339 Cranshaft signal fault.
P0334 Cam phase sensor signal missing.
P0351 No ignition output stage Cylinder #1.
P0352 No ignition output stage Cylinder #2.
P0480 Engine fan short-circuit to battery.
P0480 Engine fan short-circuit to ground or open.
P0505 Idle air control valve output stage cutoff memory difference.
P0505 Idle air control valve output stage fault.
P0513 Incorrect DESS key.
P0520 Oil pressure switch functional problem.
P0562 Battery voltage too low.
P0563 Battery voltage too high.
P0600 CAN bus off.
P0600 CAN ID 514 missing.
P0601 Throttle position sensor adaptation failure.
P0601 Module call monitoring.
P0602 ECM not coded.
P0604 RAM fault.
P0605 EEPROM fault.
P0605 EEPROM checksum fault.
P0605 Coding ID checksum fault.
P0605 Coding checksum fault.
P0605 Programming checksum fault.
P0608 Sensor's power supply voltage too low.
P0608 Sensor's power supply voltage too high.
P0616 Starter relay open circuit or shorted to ground.
P0617 Starter relay shorted to battery.
P0705 Transmission range sensor circuit malfunction (PRNHL).
P1102 Throttle position sensor adaptation failure.
P1104 Throttle position sensor adaptation failure.
P1116 High temp.
P1148 Saftey fuel cut off detected.
P1202 Oil pressure switch still closed.
P1203 Oil pressure switch leakage.
P1520 Low oil.
P1655 DESS line shorted to battery.
P1656 DESS line shorted to ground.
P1675 Relay 2 shorted to battery.
P1676 Relay 2 open circuit or shorted to ground.
P1683 CAN RAM fault.
P2119 ECU wrong.
Ake
Outlander 400 2004
34500km ٩(̾●̮̮̃̾•̃̾)۶
60CSX
En Afrique y marche +de 1km pour avoir de l'eau potable
moi quand je me leve le matin...je pisse dedans :)

Outlander 400 2004
34500km ٩(̾●̮̮̃̾•̃̾)۶
60CSX
En Afrique y marche +de 1km pour avoir de l'eau potable
moi quand je me leve le matin...je pisse dedans :)

-
Jeremie32
- Posts: 20
- Joined: November 29, 2010, 12:25 am
- VTT: OutlanderMax650
Re: Scanner diagnostic pour vtt
Merci AKE !!
-
Patman
- Site Admin
- Posts: 19151
- Joined: February 27, 2006, 10:13 am
- VTT: Kodiak 400
- Location: Ancienne-Lorette
Re: Scanner diagnostic pour vtt
Clissssss AKE t'en as eu des troubles sur ton can am :(aaa) :wink:AKE wrote:To read the active code, do the following before turning off the engine and clearing the code:
1) Turn the key to the lights ON position.
2) Use the mode button to scroll to the Engine Hour (EH).
3) Press the mode button once more and hold it while
4) Quickly (very quickly) toggle the HI LO switch. A minimum of 3 toggles within 2 seconds.
If there is an active code, it should scroll across the display.
Enjoy!
P0106 Air pressure sensor voltage out of range.
P0107 Air pressure sensor voltage too low.
P0108 Air pressure sensor voltage too high.
P0111 Air temperature sensor functional problem.
P0112 Air temperature sensor voltage too low.
P0113 Air temperature sensor voltage too high.
P0116 Engine temperature sensor functional problem.
P0117 Engine temperature sensor voltage too low.
P0118 Engine temperature sensor voltage too high.
P0122 Throttle position sensor voltage too low.
P0123 Throttle position sensor voltage too high
P0231 Fuel pump open circuit or shorted to ground.
P0232 Fuel pump shorted to battery.
P0261 Cylinder #1 injector open circuit or shorted to ground.
P0262 Cylinder #1 injector shorted to battery.
P0264 Cylinder #2 injector open circuit or shorted to ground.
P0265 Cylinder #2 injector shorted to battery.
P0336 High engine RPM detected.
P0337 No cranshaft signal detected.
P0339 Cranshaft signal fault.
P0334 Cam phase sensor signal missing.
P0351 No ignition output stage Cylinder #1.
P0352 No ignition output stage Cylinder #2.
P0480 Engine fan short-circuit to battery.
P0480 Engine fan short-circuit to ground or open.
P0505 Idle air control valve output stage cutoff memory difference.
P0505 Idle air control valve output stage fault.
P0513 Incorrect DESS key.
P0520 Oil pressure switch functional problem.
P0562 Battery voltage too low.
P0563 Battery voltage too high.
P0600 CAN bus off.
P0600 CAN ID 514 missing.
P0601 Throttle position sensor adaptation failure.
P0601 Module call monitoring.
P0602 ECM not coded.
P0604 RAM fault.
P0605 EEPROM fault.
P0605 EEPROM checksum fault.
P0605 Coding ID checksum fault.
P0605 Coding checksum fault.
P0605 Programming checksum fault.
P0608 Sensor's power supply voltage too low.
P0608 Sensor's power supply voltage too high.
P0616 Starter relay open circuit or shorted to ground.
P0617 Starter relay shorted to battery.
P0705 Transmission range sensor circuit malfunction (PRNHL).
P1102 Throttle position sensor adaptation failure.
P1104 Throttle position sensor adaptation failure.
P1116 High temp.
P1148 Saftey fuel cut off detected.
P1202 Oil pressure switch still closed.
P1203 Oil pressure switch leakage.
P1520 Low oil.
P1655 DESS line shorted to battery.
P1656 DESS line shorted to ground.
P1675 Relay 2 shorted to battery.
P1676 Relay 2 open circuit or shorted to ground.
P1683 CAN RAM fault.
P2119 ECU wrong.
Patman
Kodiak 400 / 2000
GMC Sierra 2003 / 4p/6litres
Glastron Gt 205, 4.3L, 190 hp, 2007 , Vendu
Monterey 282, 31', 2 x 5,0 litres MPI de 270 hp chaque
Garmin276C
Kodiak 400 / 2000
GMC Sierra 2003 / 4p/6litres
Glastron Gt 205, 4.3L, 190 hp, 2007 , Vendu
Monterey 282, 31', 2 x 5,0 litres MPI de 270 hp chaque
Garmin276C
-
AKE
- Posts: 5901
- Joined: May 20, 2007, 9:23 am
- VTT: oui
- Location: Terrebonne (La Plaine)
Re: Scanner diagnostic pour vtt
Ake
Outlander 400 2004
34500km ٩(̾●̮̮̃̾•̃̾)۶
60CSX
En Afrique y marche +de 1km pour avoir de l'eau potable
moi quand je me leve le matin...je pisse dedans :)

Outlander 400 2004
34500km ٩(̾●̮̮̃̾•̃̾)۶
60CSX
En Afrique y marche +de 1km pour avoir de l'eau potable
moi quand je me leve le matin...je pisse dedans :)
