coupe feu

Tout sur les Suzuki
Post Reply
supermic
Posts: 134
Joined: August 18, 2008, 8:30 pm
VTT: SUZUKI !!!!
Location: Abitibi-Teiscamingue

coupe feu

Post by supermic »

bonjours ... sa fais un mechant boute que je ne suis pas venu icit etant donner que cetais l'hiver et que je fais du skidoo ... bref ...


J'ai un petit probleme ... je veut auter le coupe feu de dessus mon quad ... un copain ma dit que javais simplement a deconecter un fils vert et noir de dessus ma boite electronique ... se que jai fais mais sans resultats ... il en as 3 jai ai toutes essayer .. peut-etre que quelqu'un sans cest le quelle et pourais me le dire ...


Merci
Mick ,,...

cest un King Quad 2008

Merci encore
Mick ...


King Quad 2008 et rzr s 2009
doctordead
Posts: 438
Joined: September 24, 2009, 9:57 am
VTT: kq750

Re: coupe feu

Post by doctordead »

si tu comprend anglais!voici le tuto!sinon va sur nyroc!

DO THIS AT YOUR OWN RISK, YOU WILL HAVE FULL THROTTLE IN REVERSE AND RISK LOSS OF CONTROL! THIS IS FOR IMFORMATIONAL PURPOSES ONLY.

This mod will eliminate the reverse limiter. Be aware, this can cause a very dangerous situation as you will then have full power in reverse. The limiter is designed in as a safety feature. Defeating it could cause you bodily harm so do this at your own risk. You can also possibly have an issue if you have the reverse bushing instead of bearing if it were to heat up due to the extra power, possibly causing you a lot of damage in the tranny if it were to break. Just so you know what you are getting into. The long term effects have also not been proven so do this mod at your own risk.

First, you need to obtain an automotive style relay, 4 or 5 spades. You only need 4 spades for this mod but if you can only find the 5 spade version, it will still work.

There are two female bayonet connectors behind the tail light. One is blue with a red tracer, the other is orange with a yellow tracer. The blue wire connects to ground with the key on and shifter placed in reverse. Connect the blue/r wire to relay terminal #86 to act as the trigger. Terminal #85 gets hooked to switched 12V power source. These two wires are what cause the relay to activate.

Terminal #87 gets connected to a good ground. Terminal #30 gets connected to the Hi diode, white wire with yellow stripe.

When the relay is activated, it will cause the ground from terminal 87 to be sent to terminal 30. Grounding the Hi diode is what eliminates the reverse limiter.



This is the type of relay you are looking for.
supermic
Posts: 134
Joined: August 18, 2008, 8:30 pm
VTT: SUZUKI !!!!
Location: Abitibi-Teiscamingue

Re: coupe feu

Post by supermic »

Merci pour ta reponce ... mais je ne comprend pas langlais ... je regarde avec ds traducteur ... mais cest pas claire claire ....
King Quad 2008 et rzr s 2009
supermic
Posts: 134
Joined: August 18, 2008, 8:30 pm
VTT: SUZUKI !!!!
Location: Abitibi-Teiscamingue

Re: coupe feu

Post by supermic »

hummmmmmmmmmmmm ............... quelqu'un pourrais me repondre ???????


Merci
Mick ....
King Quad 2008 et rzr s 2009
Post Reply

Return to “Suzuki”