Bonjours
J`ai vu sur un vidéo américain quelqu`un qui utilisait son winch pour lever ca pelle et il avait un kit de rouleau spécial pour winch dont le rouleau du bas était le double de diamètre d`un rouleau ordinaire ce qui réduit le stress sur le câble en plus d`avoir une protection lorsqu`il lève la pelle qui arrête le winch avant que le câble arrive au bout....avec ce kit ca aide beaucoup a ne pas casser ton câble d`acier....... Est-ce que quelqu`un a déjà vu ca et ou peux ton ce procurer ce kit......
Winch WARN avec pelle a neige
-
Le Brayon
- Posts: 630
- Joined: November 5, 2010, 7:14 pm
- VTT: Out Max 800R
- Location: Edmundston NB
-
Le Brayon
- Posts: 630
- Joined: November 5, 2010, 7:14 pm
- VTT: Out Max 800R
- Location: Edmundston NB
Re: Winch WARN avec pelle a neige
Voici ce que j' ai pu trouver a ce sujet.......Est-ce que quelqu'un a deja vue ca.........Désolé c`est en anglais
The one thing I really like about the kit from Can-Am is the magnetic switch that shuts off the winch so you don't lift the blade too high. Switch mounts on the quad frame where a magnet on the plow frame will make contact when raised. Shuts off power to the winch when it gets just close enough. It's a time saver not having to raise the plow slowly or using little blips on the rocker switch.
The one thing I really like about the kit from Can-Am is the magnetic switch that shuts off the winch so you don't lift the blade too high. Switch mounts on the quad frame where a magnet on the plow frame will make contact when raised. Shuts off power to the winch when it gets just close enough. It's a time saver not having to raise the plow slowly or using little blips on the rocker switch.
-
th3ic3m4n
- Posts: 64
- Joined: December 1, 2011, 12:43 pm
- VTT: Outlander XMR
- Location: Québec south-side
Re: Winch WARN avec pelle a neige
rouleau:
http://store.can-am.brp.com/product/836 ... r_Fairlead
switch: (yen as aussi pour outlander) mais c'est compatible uniquement avec les pelles alpines de BRP..
http://store.can-am.brp.com/product/0/7 ... tic_Switch
et si tu utilise sont 4 roue juste pour déblayer, tu peut mettre une sangle au lieu du cable de winch, ca ne coupera pas, rendu a l'été tu remet ton cable...
http://store.can-am.brp.com/product/836 ... r_Fairlead
switch: (yen as aussi pour outlander) mais c'est compatible uniquement avec les pelles alpines de BRP..
http://store.can-am.brp.com/product/0/7 ... tic_Switch
et si tu utilise sont 4 roue juste pour déblayer, tu peut mettre une sangle au lieu du cable de winch, ca ne coupera pas, rendu a l'été tu remet ton cable...
-
Lebleu
- Posts: 14787
- Joined: October 3, 2004, 7:04 pm
- VTT: Outlander
- Location: Granby.....échappé du zoo.
Re: Winch WARN avec pelle a neige
Mon frère a installer une limit switch, quand la gratte arrive en haut ça coupe le signal.
-
Le Brayon
- Posts: 630
- Joined: November 5, 2010, 7:14 pm
- VTT: Out Max 800R
- Location: Edmundston NB
Re: Winch WARN avec pelle a neige
Merci beaucoup les amis.....c`est exactement ce que je cherche :(b)


